钛制设备过火后性能分析及安全性预测

doi:10.16265/j.cnki.issn 1003-3033.2020.12.013

中国安全科学学报 ›› 2020, Vol. 30 ›› Issue (12): 93-99.doi: 10.16265/j.cnki.issn 1003-3033.2020.12.013

钛制设备过火后性能分析及安全性预测

宋晓枫¹, 支有冉² 副教授, 王静虹^**1 教授, 王志荣¹ 教授

1 南京工业大学安全科学与工程学院,江苏南京 211800;
2 南京工程学院机械工程学院,江苏南京 211167

收稿日期:2020-09-11 修回日期:2020-11-03 出版日期:2020-12-28 发布日期:2021-07-15
通讯作者: **王静虹(1986—),女,江苏太仓人,博士,教授,主要从事公共安全与应急管理、化工安全等方面的研究。E-mail:arain@njtech.edu.cn。
作者简介:宋晓枫 (1995—),男,河南兰考人,硕士研究生,研究方向为化工设备安全。 E-mail:898496251@qq.com。
基金资助:
国家自然科学基金资助(51606092);中国科学技术大学火灾科学国家重点实验室开放课题 (HZ2016-KF02);“安全科学与工程”江苏高校优势学科建设工程项目。

Analysis of post-fire properties and safety prediction of titanium equipment

SONG Xiaofeng¹, ZHI Youran², WANG Jinghong¹, WANG Zhirong¹

1 School of Safety Science and Engineering, Nanjing Tech University, Nanjing Jiangsu 211800, China;
2 School of Mechanical Engineering, Nanjing Institute of Technology, Nanjing Jiangsu 211167, China

Received:2020-09-11 Revised:2020-11-03 Online:2020-12-28 Published:2021-07-15

摘要/Abstract

摘要： 为预测钛制设备过火后可能出现的结构性破裂,通过恒温加热试验模拟过火环境,研究高温过火后工业纯钛TA2经不同冷却方式后的力学性能和金相组织。结果表明:加热温度低于TA2相变温度时,随着加热温度升高、加热时间延长,试样力学性能下降;加热温度超过TA2相变温度时,试样力学性能趋于稳定;但当加热时间超过60 min时,由于高温导致塑性降低,试样拉伸时提前断裂。此外,水冷处理较空冷使TA2金相组织更加规律化。钛制设备发生火灾时,应短时间内遏制火灾事故并让设备尽快降温,可降低设备发生破裂导致二次事故的概率。

关键词: 工业纯钛TA2, 过火, 力学性能, 安全性预测, 金相组织

Abstract: In order to predict possible structural cracking of titanium equipment after fire, constant temperature heating experiments were conducted to simulate post-fire environment, and mechanical properties and metallographic structure of TA2 under different cooling methods after high temperature treatment were studied. The results show that when heating temperature is lower than TA2 phase transition temperature, mechanical properties of samples will decline as heating temperature increases and time prolongs. When it exceeds that of TA2 phase transition, they tend to be stable. But when heating time exceeds 60 min, plasticity decreases due to high temperature, and sample breaks early when it is stretched. In addition, water-cooled treatment can make metallurgical structure of TA2 more regular than air-cooled one. So when a fire occurs around the titanium equipment, fire accident should be suppressed within a short time and equipment should be cooled as soon as possible to reduce probability of secondary accidents caused by equipment rupture.

Key words: industrial pure titanium (TA2), after fire, mechanical properties, safety prediction, metallographic structure

中图分类号:

X913.4

宋晓枫, 支有冉, 王静虹, 王志荣. 钛制设备过火后性能分析及安全性预测[J]. 中国安全科学学报, 2020, 30(12): 93-99.

SONG Xiaofeng, ZHI Youran, WANG Jinghong, WANG Zhirong. Analysis of post-fire properties and safety prediction of titanium equipment[J]. China Safety Science Journal, 2020, 30(12): 93-99.

参考文献

[1] SCHUTZ R W, WATKINS H B. Recent developments in titanium alloy application in the energy industry[J]. Materials Science & Engineering A, 1998, 243(1/2): 305-315.
[2] SCHUTZ R W, BAXTER C F, BOSTER P L. Applying titanium alloys in drilling and offshore production systems[J]. Journal of the Minerals, 2001, 53(4): 33-35.
[3] 周廉. 美国、日本和中国钛工业发展评述[J]. 稀有金属材料与工程, 2003, 32(8): 577-584.
ZHOU Lian. Review of titanium industry process in America, Japan and China[J]. Rare Metal Materials and Engineering, 2003, 32(8): 577-584.
[4] 李雨凌,罗云. “7·16”输油管道爆炸火灾事故[J]. 中国安全生产, 2011(7): 38-39
[5] 刘以波. TA2工业纯钛高温组织演变研究[D]. 上海:上海交通大学, 2010.
LIU Yibo. Microstructure evolution of TA2 commercial pure titanium at high temperature[D].Shanghai: Shanghai Jiaotong University, 2010.
[6] 周伟,杨英丽,于振涛,等. 工业纯钛TA2的高温变形机制研究[J]. 稀有金属, 2003,27(6): 721-725.
ZHOU Wei, YANG Yingli, YU Zhentao, et al. Study on high temperature deformation mechanism of TA2[J]. Chinese Journal of Rare Metals, 2003,27(6): 721-725.
[7] BISHOYI B D, SABAT R K, SAHU J, et al. Effect of temperature on microstructure and texture evolution during uniaxial tension of commercially pure titanium[J]. Materials Science and Engineering: A, 2017, 703: 399-412.
[8] MOITABA V A, MASOUD R, JERZY A S, et al. Surface modification of pure titanium via friction stir processing: Microstructure evolution and dry sliding wear performance[J/OL]. Journal of Alloys and Compounds, https://doi.org/10.1016/j.jallcom.2019.152557.
[9] CHOI S W, LI C L, WON J W, et al. Deformation heterogeneity and its effect on recrystallization behavior in commercially pure titanium: comparative study on initial microstructures[J]. Materials Science & Engineering: A, 2019, 764: 138-211.
[10] 刘红波,周元,徐旭晨,等. 火灾高温后6061-T6铝合金挤压型材残余力学性能研究[J]. 空间结构, 2018(3): 75-82.
LIU Hongbo, ZHOU Yuan, XU Xuchen, et al. Research on residual mechanical properties of post-fire 6061-T6 aluminum alloy extruded profile[J]. Spatial Structures, 2018(3): 75-82.
[11] 强旭红,武念铎,姜旭,等. 高强钢S460和S690火灾后力学性能试验[J]. 哈尔滨工业大学学报, 2017, 49(2): 130-138.
QIANG Xuhong, WU Nianduo, JIANG Xu, et al. Mechanical properties of high strength steels S460 and S690 after fire[J]. Journal of Harbin Institute of Technology, 2017, 49(2): 130-138.
[12] 张玉春, 何川, 罗新荣. 火灾下钢框架结构热-力耦合模拟与性能分析[J]. 中国安全科学学报, 2007,17(10): 45-49.
ZHANG Yuchun, HE Chuan, LUO Xinrong. Thermal-mechanics coupling numerical simulated of steel framed structures on fire and its performance analysis[J]. China Safety Science Journal, 2007,17(10): 45-49.

钛制设备过火后性能分析及安全性预测

Analysis of post-fire properties and safety prediction of titanium equipment

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 5

编辑推荐

Metrics

本文评价

[1]	杨帆, 鲁义, 刘艺伦, 施式亮, 王金鹏, 李松徽. 消防服充填用弹性气凝胶球粒的力学性能[J]. 中国安全科学学报, 2020, 30(7): 180-185.
[2]	王栋，解立峰，韩志伟，雷正，王浩喆. 非金属球形抑爆材料抗氧化能力和抑爆性能研究[J]. 中国安全科学学报, 2013, 23(12): 66-.
[3]	崔鲁宁，浦金云，吴晓伟. 船舶舱室火灾危险性评估方法研究[J]. 中国安全科学学报, 2008, 18(11): 143-.
[4]	张玉春，何川，罗新荣. 火灾下钢框架结构热-力耦合模拟与性能分析[J]. 中国安全科学学报, 2007, 17(10): 45-.
[5]	施式亮，刘宝琛. 基于神经网络的煤矿安全性预测模型及应用[J]. 中国安全科学学报, 1999, 9(3): 34-.